Pioneer Durarail (v3) Posi-Lube bar stencil set Jonsered These stencils are made for

These stencils are made for a 16" bar that was typical on the later model XL-12s and Super XLs

This decal set can be provided in three different formats for your convenience

Waterslide/Mixed – Many of the older saws originally had waterslide decals

We also provide the same design for a 22" and a 26" bar

Firmly press transfer tape onto decals and peel off at a sharp angle to make sure that complete decal is removed from backing paper and is on the transfer tape

Pioneer Durarail (v3) Posi-Lube bar stencil set Jonsered These stencils are made forMany of the old saw manufacturers provided bars with their name and or artwork. These bars really made the whole saw bar package look great. Problem was, after several days of cutting, the artwork on the bars typically wore off. Now you can recreate that look of a complete saw bar package with bar stencils! Just clean your bar, apply the stencils, spray a light coat or two of paint, remove the stencils and you have the artwork back! You receive