2:1 Polyolefin Heat Shrink Tubing Nominal Diameter: 1/8" Spool Size: 1320 Feet hvac-industry 19” Tensile Strength: 50 lb

19” Tensile Strength: 50 lb Bag Quantity: 1

and higher use temperature • Thin Wall for confined/tight spaces • 2:1 Shrink Ratio (shrinks to ½ its original diameter) • UL 224 VW-1 300V and CSA OFT 150V recognized • Maximum Continuous use temperature 125°C • Standard Color: Black • Shrink Temperature of 100°C and operating temperature of -55°C to + 125°C • Crosses to : Sumitomo F4

wire spring • No pre-twisting of the wires required • Reusable • Shell rated for 105° C • Flame-retardant shell • Color-coded for easy wire selection • Thermoplastic shell shields against environmental extremes • Resists chemical action from hydrocarbons

30" • Tensile Strength: 120lb • Color: Burgundy • Material: Nylon 6/6 • Qty/Bag: 100 Features • UL Listed for use in plenum or air handling spaces per NEC

10" wide • 18 lb Tensile Strength • Temperature Rating: -40°F to 185°F • Flammability Rating: UL 94 V-2 • Package contains 1000 cable ties • Miniature cross section features a curved tip for easy threading and handling • Versatile cable ties can be used in countless applications • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation UV Black Cable Ties • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • UV Black Nylon 6/6 is used in continuous or extended exposure to outdoor sunlight

2:1 Polyolefin Heat Shrink Tubing Nominal Diameter: 1/8" Spool Size: 1320 Feet hvac-industry 19” Tensile Strength: 50 lb2: 1 Polyolefin Heat Shrink Tubing Nominal Diameter: 1 8" Flat Width: 3 16" ID After Shrinking: . 063" Wall After Shrinking: . 019" Spool Size: 660 Feet Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only. Features: 2: 1 Shrink Ratio (shrinks to its original diameter) Meets requirements of SAE AMS DTL 23053 5 (formerly MIL I 23053 5, MIL DTL 23053 5), Classes 1, 2