Switch Connector to suit Mazda/Ford Halogen Searchlights they will not illuminate until

they will not illuminate until the vehicles dash lights are activated

positive wire can be connected to an ignition source so the unit is only powered once the vehicle is on (recommended)

0 Amp USB Fast Charge port that is connected to your auxiliary battery for charging essential digital devices while driving or when the vehicle isn’t in use

This specifically designed patch harness is for the NP300 allows for simple and safe integration into the vehicle’s headlight assembly without cutting or splicing into the electrical system

Clear filters are used to change the beam pattern of a spot beam light

Switch Connector to suit Mazda/Ford Halogen Searchlights they will not illuminate untilSwitch connector only (100mm in length) suitable for use with the Ford Ranger PX1 and second generation Mazda BT50 October 2011 onwards OEM driving light switch. Wiring instructions: Red wire Illuminates the blue indicator on the switch (when in the on position) for this to function connect with the yellow wire Blue wire 12v in from high beam circuit Yellow wire 12v switched out, connect with the red wire, then connect to relay {87} Black wire Connect