TSM Removable Chassis PCB Connector Set KR_Pixel_Switch 1x 37" Length - 1"

1x 37" Length - 1" OD Blade Tube (Thin - 2mm Wall)

The low profile Shtok NPXL holder can also be glued into place using e6000 or a set screw can be carefully drilled/tapped

Designed to hold an externally accessible high amp kill switch

but have no sharp edges

1/4" from the top of the holder

TSM Removable Chassis PCB Connector Set KR_Pixel_Switch 1x 37" Length - 1"I very much enjoy a removable chassis but there are opportunities that arise when using them. Shorts can occur if pins are accidentally touched to metal surfaces or to the wrong component, and they are often limited to a certain number of pins and thus functions. So we designed "one PCB to rule them all" ;) While this setup does have many, many thru hole connections, they are certainly not all required to function. Pick and choose any all that are