Radio Bridge Thermocouple Temp Sensor Operating Temperature_0 ~ 60°C it will send an alarm

it will send an alarm message to the gateway

This device can be used for Outdoor remote monitoring

Support 10-bit GPIO) FAN 1 x 4-pin CPU Fan Header / 1 x 4-pin System Fan Header POWER 1 x AT / ATX Mode Select Jumper / 1 x 4-pin ATX Power Connector OTHERS 1 x Chassis Intrusion / 1 x CMOS Jumper / 1 x Front Audio Header (Mic-in & Line-out) / 1 x panel power select header / 1 x backlight power select header

Support 10-bit GPIO) FAN 1 x 4-pin CPU Fan Header / 1 x 4-pin System Fan Header POWER 1 x 24-pin ATX Power Connector / 1 x 4-pin ATX Power Connector OTHERS 1 x Chassis Intrusion / 1 x CMOS Jumper POWER REQUIREMENT POWER INPUT ATX 24-pin + 4-pin ENVIRONMENTAL OPERATING TEMPERATURE 0 ~ 60°C (32 ~140°F) STORAGE TEMPERATURE -20 ~ 70°C (-4 ~158°F) OPERATING HUMIDITY 10% ~ 95% R/H (Non-condensing) CERTIFICATION CE / FCC Class B OS OS SUPPORT Windows® 10 64-bit / Linux (support by request) PACKING LIST PACKAGE 1 x Motherboard / 1 x 50 cm SATA Cable / 1 x Quick Installation Guide / 1 x I/O Bracket

(*Raspberry Pi is a trademark of the Raspberry Pi Foundation)

Radio Bridge Thermocouple Temp Sensor Operating Temperature_0 ~ 60°C it will send an alarmThis Radio Bridge thermocouple temperature sensor can be configured via downlink messages. Temperature reporting can be based on thresholds, report on change, and periodic messaging. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa LoRaWAN, and NBIoT.