Elbow 90° Spigot End Short Radius 1.2d size:Europress 316L S/S Elbow Stem 35mm R = 1.2d H is the dimension from

H is the dimension from the centre line of the pipe to the  end of the spigot

The assembled joint requires a matching gasket (see Gaskets & O-Rings)

The nominal dimension used to idenify the pipes refers to the outside diameter of the pipe

Europress 316L Imperial Weld Adaptor

The Small Adaptor Flange requires a loose backing ring (see Flanges & Backing Rings page) plus a gasket (see Gaskets & O-Rings) and provides a demountable connection of Europress pipe to other flanged equipment or pipes

Elbow 90° Spigot End Short Radius 1.2d size:Europress 316L S/S Elbow Stem 35mm R = 1.2d H is the dimension fromThe Spigot Elbow is an equal Spigot x Adaptor fitting with the spigot size and the adaptor size identified as d in the table. These are the short radius elbows, being 1. 2 x the diameter of the pipe. L is the dimension from the centre line of the spigot to the other end of the fitting. Z is the dimension from the centre line of the spigot to the inserted end of the pipe. H is the dimension from the centre line of the pipe to the end of the spigot.